How to apply our graphics yourself (wet method)

What you will need: spray bottle, squeegee or bank card, blade, warm soapy water, dry cloth and patience. 

Here's a more detailed breakdown:

1. Prepare the surface: Clean the area where you'll be applying the graphic with a mild soap and water solution, then dry it thoroughly.

2.Create the wet application solution: Mix a few drops of dish soap in a spray bottle of water. 

3.Mist the surface and the graphic: Lightly spray both the surface and the adhesive side of the graphic with the soapy water solution. 

4.Apply the graphic: Gently press the graphic onto the surface, allowing the water to create a cushion

5.Squeegee and reposition: Use a squeegee or credit card to smooth out the graphic, starting from the center and working outwards, pushing excess water out.

6.Allow to dry: Let the graphic dry for 30-45 minutes before removing the transfer tape.

 7.Remove the transfer tape if it has transfer tape: Once dry, lightly spray the transfer tape with the soapy water solution again and slowly peel it off. 

Back to blog